ClipArt ETC
Bow compasses should be used on all arcs and circles having a radius of less than 3/4 inch.

Bow Divider

Bow compasses should be used on all arcs and circles having a radius of less than 3/4 inch.

For drawing straight lines and curves that are not arcs of circles, the ruling pen is used. The distance between the pen points, which regulates the width of line to be drawn, is adjusted by the thumb screw, and the blades are given a slight curvature so that there will be a cavity for ink when the points are close together.

Ruling Pen

For drawing straight lines and curves that are not arcs of circles, the ruling pen is used. The distance…

For larger circles beam compasses are used. The two parts called channels which carry the pen and the needle point are clamped to a wooden beam at a distance equal to the radius of the circle. The thumb nut underneath one of the channel pieces makes accurate adjustment possible.

Beam Compasses

For larger circles beam compasses are used. The two parts called channels which carry the pen and the…

Circle pattern exercise: Draw diagonals A C and D B, and with the T-square draw the line E H. Now mark off on E H distances of 1.4 inch, and with H as a center describe, by means of the compasses, circles having radii respectively 2 inches, 1.5 inches, 1 inch, 0.75 inch, 0.5 inch, and .25 inch. Similarly with H as a center and a radius of 1.75 inch and 1.25 inches respectively raw the arcs F G and I J and K L and M N, being careful to end the arcs in the diagonals.

Circle Exercise

Circle pattern exercise: Draw diagonals A C and D B, and with the T-square draw the line E H. Now mark…

Adjusting the needle point so that it is slightly longer than that of the pencil.

The Tip of the Compass

Adjusting the needle point so that it is slightly longer than that of the pencil.

In changing the compass from a small to large radius, hold the legs together with one hand and spin the nut with the other, in order to save wear on the threads.

Adjusting the Compass

In changing the compass from a small to large radius, hold the legs together with one hand and spin…

Always draw a circle in one stroke, inclining the compass in the direction of the line and rolling the handle between the thumb and finger.

Inking a Circle

Always draw a circle in one stroke, inclining the compass in the direction of the line and rolling the…

"Section of a Hen's Egg before Incubation. a, yolk, showing concentric layers; a', its semi-fluid center; b, inner dense part of the albumen; b', outer thinner part; c, twisted cords of albumen; h, the white spot, or germ cell." -Cooper, 1887

Egg Parts

"Section of a Hen's Egg before Incubation. a, yolk, showing concentric layers; a', its semi-fluid center;…

Types of vascular bundles: "A, the concentric type, with xylem, k, surrounding the phloem, h." -Stevens, 1916

Concentric Vascular Bundle

Types of vascular bundles: "A, the concentric type, with xylem, k, surrounding the phloem, h." -Stevens,…

"Showing concentric and eccentric striations of starch grains. e, potato starch eccentrically striated; f, compound starch grain from potato; g, bean starch concentrically striated." -Stevens, 1916

Starch Grain Striations

"Showing concentric and eccentric striations of starch grains. e, potato starch eccentrically striated;…

Illustration showing the definition of a circle as a conic section. The section of a right circular cone made by a plane that is perpendicular to the axis (or parallel to the base).

Conic Section Showing A Circle

Illustration showing the definition of a circle as a conic section. The section of a right circular…

Illustration showing a circle with a radius of 2 in. intersecting a circle with a radius of 3 in..

2 Intersecting Circles

Illustration showing a circle with a radius of 2 in. intersecting a circle with a radius of 3 in..

"A circle may be considered as made up of triangles whose bases form the circumference, and whose altitude is the radius (1/2 diameter) of the circle." This is clearly shown by the cut at the left.

Circle Made Up Of Triangles

"A circle may be considered as made up of triangles whose bases form the circumference, and whose altitude…

An illustration of a circle inscribed in a square. It can be used to show that the area of a circle is .7854 of the area of a square whose sides are equal to its diameter.

Circle Inscribed In A Square

An illustration of a circle inscribed in a square. It can be used to show that the area of a circle…

An illustration of an arc of a circle. An arc is any part of the circumference of a circle.

Arc of Circle

An illustration of an arc of a circle. An arc is any part of the circumference of a circle.

An illustration showing the intersection of a plane and a cone. The cone is intersected by a plane parallel to the base, forming a circle.

Conic Section Showing A Circle

An illustration showing the intersection of a plane and a cone. The cone is intersected by a plane parallel…

An illustration showing how to find the center of a circle which will pass through three given points A, B, and C. "With B as a center, draw the arc DEFG; and with the same radius and A as a center, draw the cross arcs D and F; also with C as a center, draw the cross arcs E and G. Join D and F, and also E and G, and the crossing o is the required center of the circle."

Find The Center Of A Circle Through 3 Points

An illustration showing how to find the center of a circle which will pass through three given points…

An illustration showing how to construct a tangent to a circle through a given point in a circumference. "Through a given point A and center C, draw the line BC. With A as a center, draw the circle arcs B and C; with B and C as centers, draw the cross arcs D and E; then join D and E, which is the required tangent."

Construction Of Tangent To Circle

An illustration showing how to construct a tangent to a circle through a given point in a circumference.…

An illustration showing how to construct a tangent to a circle through a given point outside of a circumference. "Join A and C, and upon AC as a diameter draw the half circle ABC, which cuts the given circle at B. Join A and B, which is the required tangent."

Construction Of Tangent To Circle

An illustration showing how to construct a tangent to a circle through a given point outside of a circumference.…

An illustration showing how to construct a tangent circle to a circle with a given radius. "Through the given point C, draw the diameter AC extended beyond D: from C set off the given radius R to D; then D is the center of the required circle, which tangents the given circle at C."

Construction Of Circle Tangent To Circle

An illustration showing how to construct a tangent circle to a circle with a given radius. "Through…

An illustration showing how to construct a tangent circle to 2 given circles. "Join centers C and c of the given circles, and extend the line to D; draw the radii AC and ac parallel with one another. Join Aa, and extend the line to D. On CD as a diameter, draw the half circle CeD; on cD as a diameter, draw the half circle cfD; then the crossings e and f are tangenting points of the circles."

Construction Of Circle Tangent To 2 Circles

An illustration showing how to construct a tangent circle to 2 given circles. "Join centers C and c…

An illustration showing how to construct a tangent to 2 given circles of different diameters. "Join the centers C and c of the given circles, and extend the line to D; draw the radii AC and ac parallel with one another. Join Aa, and extend the line to D. On CD as a diameter, draw the half circle CeD; on cD as a diameter, draw the half circle cfD; then the crossings e and f are the tangenting points of the circles."

Construction Of Tangent To 2 Circles

An illustration showing how to construct a tangent to 2 given circles of different diameters. "Join…

An illustration showing how to construct a tangent between 2 given circles. "Join the centers C and c of the given circles; draw the dotted circle arcs, and join the crossing m, n, which line cuts the center line at a. With aC as diameter, draw the half circle afC; and with ac as a diameter, draw the half circle cea; then the crossings e and f are the tangenting points of the circles."

Construction Of Tangent Between 2 Circles

An illustration showing how to construct a tangent between 2 given circles. "Join the centers C and…

An illustration showing how to construct a circle tangent to a given line and given circle. "Add the given radius r to the radius R of the circle, and draw the arc cd. Draw the line ce parallel with and at a distance r from the line AB. Then the crossing c is the center of the required circle that will tangent the given line and circle."

Construction Of A Circle Tangent To A Line And A Circle

An illustration showing how to construct a circle tangent to a given line and given circle. "Add the…

An illustration showing how to construct the center and radius of a circle that will tangent a given circle. "Through the given point C, draw the tangent GF; bisect the angle FGE; then o is the center of the required circle that will tangent AB at C, and the line DE."

Construction Of A Center And Radius Of A Circle That Will Tangent A Given Circle

An illustration showing how to construct the center and radius of a circle that will tangent a given…

An illustration showing how to construct the center and radius of a circle that will tangent a given circle and line. "Through the given point C, draw the line EF at right angles to AB; set off from C the radius r of the given circle. Join G and F. With G and F as centers draw the arc crosses m and n. Join mn, and where it crosses the line EF is the center of the required circle."

Construction Of A Center And Radius Of A Circle That Will Tangent A Given Circle And Line

An illustration showing how to construct the center and radius of a circle that will tangent a given…

An illustration showing how to construct the center and radius of a circle that will tangent a given circle and line. "From C, erect the perpendicular CG; set off the given radius r from C to H. With H as a center and r as radius, draw the cross arcs on the circle. Through the cross arcs draw the line IG; then G is the center of the circle arc FIC, which tangents the line at C and the circle at F."

Construction Of A Center And Radius Of A Circle That Will Tangent A Given Circle And Line

An illustration showing how to construct the center and radius of a circle that will tangent a given…

An illustration showing how to construct two circles that tangent themselves and two given lines. "Draw the center line AB between the given lines; assume D to be the tangenting point of the circles; draw DC at right angles to AB. With C as center and CD as radius, draw the circle EDF. From E, draw Em at right angles to EF; and from F draw Fm at right angles to FE; then m and n are the centers for the required circles."

Construction Of Two Circles That Tangent Themselves and 2 Given Lines

An illustration showing how to construct two circles that tangent themselves and two given lines. "Draw…

An illustration showing how to construct a circle that tangents two given lines inclined to one another with the one tangenting point being given. "Draw the center line GF. From E, draw EF at right angles to AB; then F is the center of the circle required.

Construction Of A Circle That Tangents 2 Given Lines

An illustration showing how to construct a circle that tangents two given lines inclined to one another…

An illustration showing how to construct a circle that tangents two given lines and goes through a given point c on the line FC, which bisects the angle of the lines. "Through C draw AB at right angles to CF; bisect the angles DAB and EBA, and the crossing on CF is the center of the required circle."

Construction Of A Circle That Tangents 2 Given Lines And Goes Through A Given Point

An illustration showing how to construct a circle that tangents two given lines and goes through a given…

An illustration showing how to construct a cyma, or two circle arcs that will tangent themselves, and two parallel lines at given points A and B. "Join A and B; divide AB into four equal parts and erect perpendiculars. Draw Am at right angles from A, and Bn at right angles from B; then m and n are the centers of the circle arcs of the required cyma."

Construction Of A Cyma

An illustration showing how to construct a cyma, or two circle arcs that will tangent themselves, and…

An illustration showing how to construct a talon, or two circle arcs that will tangent themselves, and meet two parallel lines at right angles in the given points A and B. "Join A and B; divide AB into four equal parts erect perpendiculars; then m and n are the centers of the circle arcs of the required talon."

Construction Of A Talon

An illustration showing how to construct a talon, or two circle arcs that will tangent themselves, and…

An illustration showing how to construct a circle arc without recourse to its center, but its chord AB and height h being given. "With the chord as radius, and A and B as centers, draw the dotted circle arcs AC and BD. Through the point O draw the lines AOo and BOo. Make the arcs Co=Ao and Do=Bo. Divide these arcs into any desired number of equal parts, and number them as shown on the illustration. Join A and B with the divisions, and the crossings of equal numbers are points in the circle arc."

Construction Of A Circle Arc

An illustration showing how to construct a circle arc without recourse to its center, but its chord…

An illustration showing how to construct a center and radius of a circle that will tangent the three sides of a triangle. "Bisect two of the angles in the triangle, and the crossing C is the center of the required circle."

Construction Of The Center And Radius Of A Circle Tangent To Triangle Sides

An illustration showing how to construct a center and radius of a circle that will tangent the three…

An illustration showing how to construct an equilateral triangle inscribed in a circle. "With the radius of the circle and center C draw the arc DFE; with the same radius, and D and E as centers, set off the points A and B. Join A and B, B and C, C and A, which will be the required triangle."

Construction Of An Equilateral Triangle Inscribed In A Circle

An illustration showing how to construct an equilateral triangle inscribed in a circle. "With the radius…

An illustration showing how to construct a square inscribed in a circle. "Draw the diameter AB, and through the center erect the perpendicular CD, and complete the square as shown in the illustration."

Construction Of A Square Inscribed In A Circle

An illustration showing how to construct a square inscribed in a circle. "Draw the diameter AB, and…

An illustration showing how to construct a square circumscribed about a circle. "Draw the diameters AB and CD at right angles to one another; with the radius of the circle, and A, B, C, and D as centers, draw the four dotted half circles which cross one another in the corners of the square, and thus complete the problem."

Construction Of A Square Circumscribed About A Circle

An illustration showing how to construct a square circumscribed about a circle. "Draw the diameters…

An illustration showing how to construct a pentagon inscribed in a circle. "Draw the diameter AB, and from the center C erect the perpendicular CD. Bisect the radius AC at E; with E as center, and DE as radius, draw the arc DE, and the straight line DF is the length of the side of the pentagon."

Construction Of A Pentagon Inscribed In A Circle

An illustration showing how to construct a pentagon inscribed in a circle. "Draw the diameter AB, and…

An illustration showing how to construct a pentagon on a given line. "From B erect BC perpendicular to and half the length of AB; join A and C prolonged to D; with C as center and CB as radius, draw the arc BD; then the chord BB is the radius of the circle circumscribing the pentagon. With A and B as centers, and BD as radius, draw the cross O in the center."

Construction Of A Pentagon On A Line

An illustration showing how to construct a pentagon on a given line. "From B erect BC perpendicular…

An illustration showing how to construct a hexagon in a given circle. "The radius of the circle is equal to the side of the hexagon."

Construction Of A Hexagon In A Circle

An illustration showing how to construct a hexagon in a given circle. "The radius of the circle is equal…

An illustration showing how to use isometric perspective. "This kind of perspective admits of scale measurements the same as any ordinary drawing, and gives a clear representation of the object. It is easily learned. All horizontal rectangular lines are drawn at an angle of 30°. All circles are ellipses of proportion, as shown."

Construction Using Isometric Perspective

An illustration showing how to use isometric perspective. "This kind of perspective admits of scale…

An illustration showing how to construct an ellipse. "With a as a center, draw two concentric circles with diameters equal to the long and short axes of the desired ellipse. Draw from o any number of radii, A, B, etc. Draw a line Bb' parallel to n and bb' parallel to m, then b is a point in the desired ellipse.

Construction Of An Ellipse

An illustration showing how to construct an ellipse. "With a as a center, draw two concentric circles…

An illustration showing how to construct an ellipse using circle arcs. "Divide the long axis into three equal parts, draw the two circles, and where they intersect one another are the centers for the tangent arcs of the ellipses as shown by the figure."

Construction Of An Ellipse

An illustration showing how to construct an ellipse using circle arcs. "Divide the long axis into three…

An illustration showing how to construct a cycloid. "The circumference C=3.14D. Divide the rolling circle and base line C into a number of equal parts, draw through the division point the ordinates and abscissas, make aa' = 1d, bb' = 2'e, cc = 3f, then ab' and c' are points in the cycloid. In the Epicycloid and Hypocycloid the abscissas are circles and the ordinates are radii to one common center."

Construction Of A Cycloid

An illustration showing how to construct a cycloid. "The circumference C=3.14D. Divide the rolling circle…

An illustration showing how to construct an evolute of a circle. "Given the pitch p, the angle v, and radius r. Divide the angle v into a number of equal parts, draw the radii and tangents for each part, divide the pitch p into an equal number of equal parts, then the first tangent will be one part, second two parts, third three parts, etc., and so the Evolute is traced."

Construction Of An Evolute Of A Circle

An illustration showing how to construct an evolute of a circle. "Given the pitch p, the angle v, and…

An illustration showing a circle with radius r, diameter d, and chord c.

Radius, Diameter, and Chord In A Circle

An illustration showing a circle with radius r, diameter d, and chord c.

An illustration showing a circle sector with radius r, center/central angle v, and length of circle arc b.

Circle Sector

An illustration showing a circle sector with radius r, center/central angle v, and length of circle…

An illustration showing a circle sector with center/central angle v and polygon angle w.

Circle Sector

An illustration showing a circle sector with center/central angle v and polygon angle w.

An illustration showing a circle sector with height of segment h and radius r.

Circle Sector

An illustration showing a circle sector with height of segment h and radius r.

An illustration showing a triangle with sides b, c, and d inscribed in a circle with radius r.

Triangle Inscribed In A Circle

An illustration showing a triangle with sides b, c, and d inscribed in a circle with radius r.

An illustration showing a circle with radius r inscribed in a triangle with sides a, b, and c.

Circle Inscribed In A Triangle

An illustration showing a circle with radius r inscribed in a triangle with sides a, b, and c.

An illustration showing a quadrilateral inscribed in a circle that is tangent to a line.

Quadrilateral Inscribed In A Circle

An illustration showing a quadrilateral inscribed in a circle that is tangent to a line.

An illustration showing a triangle with angles A, C, and D inscribed in a circle which is tangent to a line.

Triangle Inscribed In A Circle

An illustration showing a triangle with angles A, C, and D inscribed in a circle which is tangent to…

An illustration showing a circle with sectors D and E inscribed in a triangle with angles, A, B, and C.

Circle Inscribed In A Triangle

An illustration showing a circle with sectors D and E inscribed in a triangle with angles, A, B, and…

An illustration showing a model of a circle with intersecting chords that illustrates the following relationship: a:c = b:d, ad = bc. Product of the means equals the product of the extremes.

Model Of Geometric Proportions In A Circle

An illustration showing a model of a circle with intersecting chords that illustrates the following…

Circles showing fraction values and how to multiply and add fractions.

Fraction Circles

Circles showing fraction values and how to multiply and add fractions.

"It is found that the cord covering the curved surface is twice as long as the one covering the flat surface. So the area of the entire curved surface of a sphere is equal to the area of the surface of 4 circles like the one measured." -Foster, 1921

Area of Sphere

"It is found that the cord covering the curved surface is twice as long as the one covering the flat…

An illustration showing a model of a circle with an exterior angle formed between a tangent and a secant that illustrates the following geometric relationship: a:t = t:b, t&sup2 = ab

Model Of Geometric Relationships In A Circle

An illustration showing a model of a circle with an exterior angle formed between a tangent and a secant…

An illustration showing a model of a circle with angles formed between tangents and secants that illustrates the following geometric relationship: t&sup2 = (a + b)(a - b).

Model Of Geometric Relationships In A Circle

An illustration showing a model of a circle with angles formed between tangents and secants that illustrates…

An illustration showing a model of 2 circles with tangent lines, diameters, and radii that illustrates the following geometric relationship: "x = aR/(R - r), a = √(t&sup2 + (R - r)&sup2), t = √(a&sup2 - (R - r)&sup2, sin.v = t/a."

Model Of Geometric Relationships In 2 Circles

An illustration showing a model of 2 circles with tangent lines, diameters, and radii that illustrates…